GECAT 21,6

Walkaround Cabin - Specifications

Hull:

23 Ft ( Length 6,95 x Beam 2,75 meter) In colour of your choice

Transom: XL (25 inch)

Bulkheads 5 G.R.P Foamed in between

2 Inboard Fuel Tanks ( 100 Lt Roto Moulded) Cross linked Polyethylene

Buoyancy: Fully Foamed

Anchor hatches with 316 stainless steel hinges and catches

Front Storage/ Hatch with 316 stainless steel hinges and catches

6 Cubby Holes in the inner skirt of the gunwales with S/S hinges & catches, 3 per side

2 Inserts for gaffs and spear guns, 1 per side

2 Battery Boxes in the gunwales, 1 per side

1 Live Bait well in walkway between the motors

1 Hydraylic ram access hatch in walk way

2 Deck wash points one Forward and one Aft with hose and nozzle

1 4,8 Bar Pump supplies water to the prep-station, live bait well and deck wash points. Salt water

1 Hatch/Seat in front of the cabin with 316 S/S hinges and catches

1 Steering Console with 1 set draws with moulded door & large access hatch to area behind the console

Skippers resting post with seat behind insulated below as a cool box, 2 pax seats

Smaller bum rest with seat behind on Port side, 2 pax seats

Seating in fromt of cabin, 2 pax seats

2 Rear prep-stations

CABIN:

Ceiling finish: Gelcoat Inside panels finish: Ripple gelcoat

2 Curved glass windscreens

1 Centre screen with ventilation hatch

Ventilation Hatch in the ceiling "Optional"

2 Sliding window one on each side of the cabin

1 Rubbing Strakes: Black Aluminum

1 LED Port and Starboard navigation lights

1 LED All round on small pole

1 Red Light over skipper position

1 White Light opposite skipper

2 Large Dome Lights under overhang of the cabin (rear deck lights)

1 6 Gang switch panel

Deck Finish:

Non-slip in Fine grit (Optional Extra" Flotex Carpet)

Seats in Cabin and on rear prep station. (Optional Extra" on front of cabin)

2 x 200 Litre Fuel Tanks " Stainless Steel Optional"

Stainless Steel Package:

1 Bow Rail from Bow to back of cabin

1 Bow roller/anchor roller

1 Anchor Bollard

1 Bow Eye

1 Stern eye

1 Walkway between the motors with dropdown ladder

1 Rocket launch/Vertical rod holders on back edge of the cabin

1 Trolling Bars with G.R.P. moulded trolling boards

6 Rod holders in the Gunwale (3 per-side) Reinfoced below

6 Rod holders on top of trolling boards (3 (per-side)

1 Low Profile Radar Arch/for antenna's etc.,

6 Mooring Cleats

2 Grab handles

Steering System:

Hydraulic hydrive cat mount with stainless steel steering wheel, heavy duty rose joints, and tie bar

Rigging of Motors:

4 x 80 Amp deep cycle batteries (2 for engines and 2 house batteries)

2 x Stainless Steel Transom plates

Battery cabling and wiring

3 x Isolator switches

Electronic's Garmin:

2 x 923XSV Plotter/Sounder

1 x VHF 215i AIS Radio with Antenna

1 x In hull GT 15M 600 watt Transducer

1 x Transom Mount Temp Prob

Starter Kit

For detailed PRICE QUOTE quote please contact Errol at Tel: ‭+27 (83) 521-4903‬ or Email: gecatboats@wol.co.za